Whether you own a fairly newly built structure and need standard plastering services or skimming or period property which requires lime putty, wattle, and daub work. So just get in touch with Hyper Fixes Technical Services today. We offer our Plastering services throughout the UAE area.
Plastering is a technical task that is carried out by experienced and well-trained masons using different plastering tools. Plastering is the critical stage of any building construction process because it gives the final look. All defects or irregularities of walls must be covered during plaster and the wall will get a smooth and flawless finish.
Before plastering our professional masons wait for the wall to dry and cure with clean water until the bricks stop absorbing water. They carried out this process at least 8-10 hours before plastering the walls. If this process is not carried out right before plaster, the mortar will not work out on walls or when it settles and dries, cracks will appear on the surface.
So this technical task must be carried out by professionals and our plastering workers are expert enough to do.
Table of Contents
Hyper Fixes Plastering Services
Our expert plastering services in Dubai includes:
- External and Internal rendering & skimming
- Skim & Re-skims
- Plasterboard skimming
- Plastering-boarding
- Dry lining
- Skimming over Artex
- Coving
- Traditional Plastering Techniques (lime putty, wattle and daub plastering)
- Plaster repair and maintenance services
Hyper Fixes plastering procedure
Surface preparation for plastering
- To hold the plaster properly, our masons keep the mortar rough.
- They also keep the wall rough for plaster.
- With the help of a wire brush, they clean all the joints and services of the wall, it should be grease-free and oil-free.
- They filled the holes in the walls before plaster.
- In case of any projection in the wall, they knock it out of the wall for a smooth surface.
Plaster Groundwork
- Firstly, they fix the dots on the wall, which means patches of 5mm and a thickness of about 10mm.
- They fix the Dots on the wall horizontally and then vertically on the entire wall surface with a distance of 2 meters.
- They use the plumb-bob to check the verticality of dots over and over.
- After dot fixing, they use vertical strips of plaster (screeds), these screeds serve as a gauge for the thickness of plastering being applied.
Application of Under coat or Base coat
Our masons usually use these measurements for wall plastering.
- The general thickness of the first coat of plaster for brick masonry is 12mm and for concrete masonry, the thickness varies from 9 to 15mm.
- They maintain a ratio between cement and sand is 1:3 to 1:6.
- Sing a trowel, they apply the first coat of plaster between spaces (created by the screeds in the wall surface).
- They use flat wooden floats and wooden straight edges for surface levelling.
- After applying the first coat they rough it with the scratching tool for the application of the second coat.
Finishing coat
- Its thickness varies between 2-3mm.
- The ratio of the second layer of sand and cement is 1:4 to 1:6.
- They moist the wall before the application of the second coat.
- The finishing coat is applied using wooden floats, then they give it a finishing touch using a steel trowel.
- They apply the finishing coat from top to bottom and is completed uniformly to avoid joining marks.
Cure of plaster work
Due to improper curing, cracks occur on the surface so our masons properly check this.
- To provide strength and hardness to the plaster, they sprinkled the water for at least 7 days on it.
- They use Gunny bags and other materials are used to keep plastering work wet.
Cleaning Services
- Our experts clean the Doors, frames, and floor areas after the completion of plasterwork, which is not common in other plastering service providers.
Curing Duration
- Curing should be done properly after the plaster for at least 7 days.
- Curing should start after 24 hours of plaster completion.
Just give us a call, your walls need a new look with our expert plastering services. Hyper Fixes offer comprehensive plastering services at very economical rates. Our highly trained crew uses modern techniques and quality materials for plastering walls. If you own a newly built or historic property then it can be difficult for you to find a skilled person, especially in this area.
Hyper Fixes professionals strive to provide the best drywall and plastering services in Dubai, UAE. Our masons have enough skills, experience, and training required for quality results. You need a professional drywall plastering contractor like us to get the quality service you desire.